Elliptipar 12-4' Weather Proof Light Fixtures for sale in Sarasota, Florida

GO TO THIS URL TO SEE PICTURES AND SPECS
/elliptipar/Uplite/Upltepdf/U9.pdf
I HAVE 12 FIXTURES AND LAMPS, 6 BALLASTS
YOU ONLY NEED 1 BALLAST FOR 2 FIXTURES
EElliptipar 4' Out Door Lighting Fixture
PART #F152-F348-H-02-A-OD-O
F = Linear fluorescent
152 = Large outdoor, remote ballast
F = T12 HO Fluorescent
3= Reflector Configuration (2-4'-1ballast)
48= 48"
H= Mounting hub with 3/4" NPT internal thread for 3/4" rigid conduit supports or fittings (by others);
02= Semi-gloss white
A=120v
OD= Remote ballast for dry indoor location
O= UL, Underwriters Laboratories
complete with lamps and remote ballast
WELL BELOW RETAIL
These light fixtures were left over from a project and were not returned due to the vendors restocking fees.
Fixtures are new, never used and come complete with lamp, remote ballast, and mounting hub to join fixtures together. (3/4" conduit and outlet box sold separate)
Fixtures are sold in 2 - 4' sections to make a 8' section
Specifications
A UV and impact resistant acrylic snap-on lens with EPDM gasket
B Die-cast aluminum end plates
C Cast aluminum mounting hubs (black)
D 3/4" rigid conduit pendant or cantilever supports (by others)
E Outlet boxes, liquidtight conduit and fittings (by others)
F Specular extruded aluminum reflector
G Aluminum reveal plates (black)
H Gasketed splice access cover plate
J Remote ballast in weatherproof aluminum enclosure
K Architectural cove (for design guidance, see Applications Section)
Features
Powerful HO, VHO fluorescent for up lighting of soffits and exterior walls, vaults or canopies from minimal setbacks
? Snap-on acrylic lens with EPDM gasket - watertight for upward orientations; suitable for cold weather operation
? Durable aluminum construction - die-cast end plates and mounting hubs, extruded reflector; powder coat finish
Finish:
Exterior surfaces - 6 stage pretreatment and electrostatically applied thermoset polyester powder coating for a durable abrasion, fade and corrosion resistant finish. Choice of semi-gloss colors. Mounting hubs finished black. Reflector and internal end plates - extruded high purity aluminum with clear anodized specular finish. All hardware and components - non corrosive stainless steel or aluminum. Snap-on lens - composite of impact resistant and UV stabilized acrylic. EPDM gasket for watertight operation when facing upward.
Standard:
UL listed or CSA certified for wet locations when mounted horizontally. For positions other than horizontal, consult factory.
Mounting:
Cast aluminum mounting hubs with internal 3/4" NPT threaded entry. 3/4" rigid conduit supports or fittings (by others). Allow 5 lbs/foot of reflector (example: 8' unit x 5 = 40 lbs). One hub supplied with each reflector. Hub attaches to an adjacent reflector to form a continuous row. End-of-row mounting kit includes one hub and two end caps (ordered separately, one kit required for each individually mounted unit or for each continuous row). Reflector is adjustable about the hubs. Aiming is locked in position with screws in the hubs. Electrical: Use 90C wire for supply connections. Wire leads exit one end of reflector for splicing within mounting hub. Removable cover plate on hub allows access to splices. Remote magnetic HPF thermally protected class P ballast rated for -20F/-29C starting. Weatherproof aluminum enclosure includes three 7/8" dia. entries and one 3/8" liquidtight conduit connector. Maximum wire length between ballast and fixture using #14 wire is 21' (6.4m). For complete ballast specifications, see Accessories Section.

Reply to Seller